BaTe3
ceramic· JVASP-8168· BaTe3
BaTe3 is an inorganic ceramic compound composed of barium and tellurium, belonging to the telluride ceramic family. This material is primarily investigated in research contexts for thermoelectric and optoelectronic applications, where telluride ceramics are valued for their unique electronic and thermal transport properties. BaTe3 represents an exploratory material in materials science aimed at energy conversion and solid-state electronic device development, though industrial-scale production and deployment remain limited compared to conventional ceramics.
thermoelectric devicessolid-state electronics researchphotovoltaic materials studythermal management materialsadvanced ceramics developmentsemiconductor research
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Dielectric Constant (Relative Permittivity)(εr) | — | - | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Piezoelectric Modulus(eij) | — | C/m² | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.