BaN6
ceramic· BaN6
BaN₆ is a ceramic nitride compound in the boron-nitrogen material family, representing an advanced refractory ceramic with potential for high-temperature and wear-resistant applications. This material is primarily of research and development interest rather than established production use, with investigation focused on extreme environment applications where thermal stability and hardness are critical. The boron nitride ceramic family is valued for thermal management, electrical insulation, and abrasive applications where conventional oxides prove inadequate.
High-temperature refractory coatingsAdvanced ceramic compositesThermal barrier systemsAbrasive/wear-resistant componentsResearch and development materials
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 40.61 | GPa | — | ||
Poisson's Ratio(ν) | 0.3700 | - | — | ||
Shear Modulus(G) | 13.77 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 3.212 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 3.829 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 7.570 | - | — | ||
Electronic Dielectric Tensor(ε∞) | Matrix (redacted) | - | — | ||
Total Dielectric Tensor(ε) | Matrix (redacted) | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -213.3 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.06160 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.2364 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.