BaMg2Fe
metal· JVASP-65426· BaMg2Fe
BaMg₂Fe is an intermetallic compound combining barium, magnesium, and iron in a defined stoichiometric ratio. This material belongs to the family of ternary metal compounds and is primarily of research interest rather than a widely commercialized engineering material. The compound is investigated for potential applications in lightweight structural applications, magnetic materials research, and energy storage systems where the combination of light (Mg) and magnetic (Fe) elements with an alkaline-earth metal (Ba) offers unique property combinations not found in conventional binary alloys.
intermetallic research compoundslightweight structural compositesmagnetic material developmentenergy storage systemshigh-strength lightweight alloys
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 32.34 | GPa | — | ||
Poisson's Ratio(ν) | 0.2700 | - | — | ||
Shear Modulus(G) | 19.23 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 4.072 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 2.467 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.3975 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.3046 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.