BaCaTl
ceramic· JVASP-66026· BaCaTl
BaCaTl is an experimental ceramic compound containing barium, calcium, and thallium elements, representing a mixed-metal oxide or intermetallic ceramic phase. This material exists primarily in research contexts exploring high-density ceramic systems and potential superconducting or electronic material families. Its practical applications remain limited to laboratory investigation, though the barium-calcium-thallium system is studied for potential relevance in specialized electronic ceramics, thermal management systems, or superconducting material development where high density and specific crystal structures are targeted.
experimental ceramic researchhigh-density ceramicselectronic materials developmentsuperconductor researchthermal barrier applications (exploratory)materials science characterization
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 2,069.7 | ksi | — | ||
Shear Modulus(G) | -1,630.2 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1832 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.5319 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.1921 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.