AZ92A is a magnesium alloy containing aluminum and zinc, used primarily in aerospace and defense applications where lightweight structural components are required. The T6 temper (solution heat-treated and artificially aged) provides enhanced strength and hardness suitable for moderate-temperature service, with typical applications including aircraft engine housings and transmission cases.
Compliance & Regulations
13 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec)2 entries | 6,500 | ksi | 22°C · Permanent mold casting | ||
| ↳ | Curve (13 pts) | ksi | L | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (13 pts) | ksi | 21°C · L | ||
Poisson's Ratio(ν) | 0.3500 | - | 22°C | ||
Shear Modulus(G) | 2,400 | ksi | 22°C · Permanent mold casting | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (7 pts) | ksi | 21°C · L | ||
| ↳ | Curve (11 pts) | ksi | 21°C · L | ||
| ↳ | Curve (8 pts) | ksi | 149°C · L | ||
| ↳ | Curve (7 pts) | ksi | 204°C · L | ||
Ultimate Tensile Strength(σUTS)3 entries | Curve (14 pts) | ksi | L | ||
| ↳ | Curve (9 pts) | ksi | L | ||
| ↳ | Curve (6 pts) | ksi | L | ||
Yield Strength (0.2% offset)(σy)3 entries | Curve (10 pts) | ksi | L | ||
| ↳ | Curve (10 pts) | ksi | L | ||
| ↳ | Curve (8 pts) | ksi | L | ||
Young's Modulus(E)2 entries | 6,500 | ksi | 22°C · Permanent mold casting | ||
| ↳ | Curve (13 pts) | ksi | L |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (9 pts) | µin/in·°F | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (4 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.06590 | lb/in³ | 22°C |