AsPPd2
ceramic· JVASP-75496· AsPPd2
AsPPd2 is an intermetallic ceramic compound combining arsenic, palladium, and an unspecified third element, representing a specialized material from the intermetallic ceramics family. This compound appears to be primarily a research or emerging material with potential applications in high-temperature structural applications, catalytic systems, or semiconductor device contexts where the combination of metallic and ceramic properties offers advantages over conventional alternatives. The material's specific industrial adoption and performance advantages would depend on its synthesis scalability and property optimization relative to established ceramic and intermetallic alternatives.
research materialintermetallic compoundshigh-temperature applicationscatalyst support systemssemiconductor device research
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 18,840.4 | ksi | — | ||
Shear Modulus(G) | -2,158.2 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2979 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.5439 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.1676 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.