AM-355 Stainless Steel SCT 1000
VerifiedmetalAM-355 is a martensitic stainless steel (17Cr-4.3Ni-2.8Mo-1.3Ti) used in aerospace applications requiring high strength and corrosion resistance at elevated temperatures, with SCT 1000 condition (solution heat-treated and aged at 1000°F) providing yield strengths in the 170–180 ksi range with moderate ductility for demanding structural and fastener applications.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | Curve (10 pts) | Pa | — | — | |
Bearing Yield Strength(Fbry) | Curve (12 pts) | Pa | — | — | |
Compressive Modulus(Ec) | — | Pa | 22°C · Sheet/Strip | — | |
Elongation at Break(εf) | — | - | 22°C · Plateb · SCT 1000 · AMS 5549a · LT · t=<0.187 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Sheet/Strip | — | |
Ultimate Tensile Strength(σUTS) | — | Pa | 22°C · Plateb · SCT 1000 · AMS 5549a · LT · t=<0.187 in | — | |
Yield Strength (0.2% offset)(σy) | — | Pa | 22°C · Plateb · SCT 1000 · AMS 5549a · LT · t=<0.187 in | — | |
Young's Modulus(E) | — | Pa | 22°C · Sheet/Strip | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (13 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (13 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.