AlSiP3
metal· JVASP-21270· AlSiP3
AlSiP3 is an aluminum-silicon-phosphorus intermetallic compound that belongs to the family of lightweight metal matrix composites and advanced aluminum alloys. While not a widely commercialized standard alloy, this material represents research into phosphorus-modified aluminum systems aimed at improving strength, wear resistance, and thermal stability compared to conventional Al-Si castings. The phosphorus addition acts as a grain refiner and hardening element, making this composition potentially valuable for applications requiring enhanced mechanical performance at moderate temperatures without significant weight penalty.
lightweight structural componentswear-resistant coatingsthermal management applicationsautomotive engine blocksresearch/advanced metallurgyhigh-strength aluminum castings
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 12,332.6 | ksi | — | ||
Poisson's Ratio(ν) | 0.2100 | - | — | ||
Shear Modulus(G) | 9,059.1 | ksi | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.09776 | lb/in³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.3620 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Seebeck Coefficient(S) | -134.3 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.01220 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.3678 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.