AISI 4340 is an ultra-high-strength low-alloy steel with excellent hardenability. Widely used for aircraft landing gear, shafts, and gears where very high strength-to-weight ratio is needed.
Compliance & Regulations
50 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Charpy Impact vs Temperature(CVN(T)) | Curve (9 pts) | J | — | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (10 pts) | ksi | 21°C · L | ||
Fracture Toughness(KIC) | 45.50 | ksi·√in | — | — | |
Poisson's Ratio(ν) | 0.2900 | - | — | — | |
S–N Curve (Wöhler)(S–N) | — | ksi | 38 entriesClick to expand | ||
Stress–Strain Curve(σ–ε) | Curve (10 pts) | ksi | 20°C | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 7 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy)2 entries | 213.2 | ksi | Q&T 315°C | — | |
| ↳ | Curve (14 pts) | ksi | L | ||
Young's Modulus(E)2 entries | 29,007.5 | ksi | — | — | |
| ↳ | Curve (10 pts) | ksi | L | ||
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | ||
Specific Heat Capacity(Cp) | 0.1135 | BTU/(lb·°F) | — | — | |
Thermal Conductivity(k) | 25.71 | BTU/(hr·ft·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (14 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2836 | lb/in³ | — | — |