AcZn
ceramic· JVASP-156753· AcZn
AcZn is a ceramic composite or intermetallic material based on acetate and zinc chemistry, representing a specialized compound developed for niche engineering applications where corrosion resistance and moderate stiffness are required. This material family is primarily encountered in corrosion-protective coatings, electrochemical applications, and advanced composite research rather than structural bulk applications. Engineers would consider AcZn when conventional metallic coatings prove inadequate and ceramic-like properties (hardness, chemical stability) are needed at lower cost than traditional advanced ceramics.
corrosion-resistant coatingselectrochemical protectioncomposite reinforcementzinc-based ceramics researchprotective surface treatmentschemical environment resistance
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | ksi | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.