ABS (Acrylonitrile Butadiene Styrene) (FDM, UltiMaker ABS) — Properties & Data | MatWorld

ABS (Acrylonitrile Butadiene Styrene) (FDM, UltiMaker ABS)

· UltiMaker ABS

UltiMaker ABS is a filament grade of acrylonitrile butadiene styrene made by UltiMaker for fused deposition modeling. Printed parts are built from fused extruded roads, so strength and toughness are lower across layers than within them. The layer lines leave a ribbed surface that is often sanded or smoothed with acetone vapor. ABS shrinks on cooling and tends to warp, so it is printed on a heated bed, preferably in an enclosed chamber, with supports under overhangs. Parts serve as functional prototypes, housings, jigs and fixtures that need more heat resistance and impact toughness than PLA. Every value on this page is read from UltiMaker's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

functional prototypeshousingsjigsfixtures

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

ABS (Acrylonitrile Butadiene Styrene, FDM)/ABS (Acrylonitrile Butadiene Styrene) (FDM, UltiMaker ABS)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Table

Orientation

Specification

Property	Value	Unit	Conditions
Notched Charpy Impact Strength(acN)	14.20 range 13.00–15.40	kJ/m²	23°C · ISO 179-1 / 1eB · XY
Elongation at Break(εf)3 entries	4.600 range 4.300–4.900	%	ASTM D3039 · XY
↳	4.500 range 4.300–4.700	%	YZ (Side) · ASTM D3039
↳	2.000 range 1.900–2.100	%	ASTM D3039 · Z
Flexural Modulus(Ef)3 entries	1.430 range 1.347–1.513	GPa	ISO 178 · XY
↳	1.470 range 1.422–1.518	GPa	YZ (Side) · ISO 178
↳	1.317 range 1.289–1.345	GPa	ISO 178 · Z
Flexural Strength (MOR)(σf)3 entries	61.10 range 57.90–64.30	MPa	ISO 178 · XY
↳	60.20 range 59.60–60.80	MPa	YZ (Side) · ISO 178
↳	21.50 range 19.70–23.30	MPa	ISO 178 · Z
Hardness (Shore D)(Shore D)	76.00	Shore D	ISO 7619-1 · XY
Ultimate Tensile Strength(σUTS)3 entries	33.90 range 32.40–35.40	MPa	ASTM D3039 · XY
↳	35.70 range 34.70–36.70	MPa	YZ (Side) · ASTM D3039
↳	19.00 range 18.40–19.60	MPa	ASTM D3039 · Z
Yield Strength (0.2% offset)(σy)2 entries	38.10 range 37.80–38.40	MPa	ASTM D3039 · XY
↳	38.20 range 37.80–38.60	MPa	YZ (Side) · ASTM D3039
Young's Modulus(E)3 entries	1.962 range 1.931–1.993	GPa	ASTM D3039 · XY
↳	1.931 range 1.863–1.999	GPa	YZ (Side) · ASTM D3039
↳	1.699 range 1.586–1.812	GPa	ASTM D3039 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Filter by

Specification

Property	Value	Unit	Conditions
Glass Transition Temperature(Tg)	373.7	K	ISO 11357
Heat Deflection Temperature(HDT)	359.8 range 359.4–360.2	K	0.45 MPa load · ISO 75-2 / B
Vicat Softening Temperature(VST)	367 range 366.3–367.7	K	ISO 306 / A120

Verified Unverified Low confidence (<80%) Link to source

Filter by

Property	Value	Unit	Conditions	Source
Density(ρ)	1.100	kg/m³	ISO 1183

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

ABS (Acrylonitrile Butadiene Styrene) (FDM, UltiMaker ABS)

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific