ABS (Acrylonitrile Butadiene Styrene) (FDM, Stratasys ABS-M30i) — Properties & Data | MatWorld

ABS (Acrylonitrile Butadiene Styrene) (FDM, Stratasys ABS-M30i)

· ABS-M30i

Stratasys ABS-M30i is a maker's grade of ABS filament for fused deposition modeling, where the amorphous thermoplastic is extruded through a heated nozzle and laid down layer by layer. Printed parts show layer lines and small voids between deposited roads, and they are weaker and less tough across layers than within them. Shrinkage on cooling makes ABS prone to warping, so it is usually printed in a heated enclosure. Overhangs need support material, often a soluble one, and surfaces are commonly sanded or vapor smoothed. Parts are used for functional prototypes, jigs, fixtures, housings and low-volume end-use components. Every value on this page is read from Stratasys' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

functional prototypesjigsfixtureshousingslow-volume end-use components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

ABS (Acrylonitrile Butadiene Styrene, FDM)/ABS (Acrylonitrile Butadiene Styrene) (FDM, Stratasys ABS-M30i)

Units:

si imperial

Filter by

Specification

Property	Value	Unit	Conditions
Flexural Modulus(Ef)	2.300	GPa	ASTM D790
Flexural Strength (MOR)(σf)	61.00	MPa	ASTM D790
Notched Izod Impact Strength(Izod)	139	J/m	23°C · ASTM D256
Young's Modulus(E)	2.400	GPa	ASTM D638

Verified Unverified Low confidence (<80%) Link to source

Filter by

HDT Load

Specification

Property	Value	Unit	Conditions
Glass Transition Temperature(Tg)	381.2	K	DSC (SSYS)
Heat Deflection Temperature(HDT)2 entries	369.2	K	0.45 MPa load · ASTM D648
↳	355.2	K	1.8 MPa load · ASTM D648
Vicat Softening Temperature(VST)	372.2	K	ASTM D1525

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	1.050	kg/m³	—	—

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Filter by

Specification

Property	Value	Unit	Conditions	Source
Dielectric Constant (Relative Permittivity)(εr)	2.800 range 2.700–2.900	-	ASTM D150-98
Dielectric Strength(Eb)	8,858,273 range 3,149,608–14,566,937	V/m	ASTM D149-09, Method A

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

ABS (Acrylonitrile Butadiene Styrene) (FDM, Stratasys ABS-M30i)

Mechanical Properties

Thermal Properties

Physical Properties

Electrical Properties

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific