A356.0 T6P
metalA356.0 T6P is a cast aluminum-silicon alloy (7–8% Si) solution heat-treated and precipitation-hardened with thermal stress relief, used primarily in aerospace and automotive applications requiring moderate strength and good castability. The T6P condition provides improved dimensional stability and reduced residual stress compared to standard T6, making it suitable for precision cast components requiring tight tolerances.
aerospacestructural
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Casting | — | |
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (11 pts) | ksi | 21°C · L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Casting | — | |
Stress–Strain Curve(σ–ε) | Curve (10 pts) | ksi | 21°C · L | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))2 entries | Curve (8 pts) | ksi | 21°C · L | — | |
| ↳ | Curve (8 pts) | ksi | 21°C · L | — | |
Young's Modulus(E) | — | ksi | 22°C · Casting | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.