7475 Aluminum T7351
metalUNS A97475
7475 Aluminum T7351 is a high-strength Al-Zn-Mg-Cu alloy in a stabilized temper condition, providing reduced quench sensitivity and improved stress-corrosion cracking (SCC) resistance compared to T73 through controlled overaging. Primary applications include aerospace structures, fuselage skin, and components requiring sustained strength at service temperatures up to 150°C, with typical yield strengths in the 380–430 MPa range and fracture toughness superior to T7 tempers.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Thickness
e/D Ratio
Basis
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | — | ksi | 24 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | — | ksi | 24 entriesClick to expand | ||
Compressive Modulus(Ec) | — | ksi | 22°C · Sheet | — | |
Compressive Tangent Modulus vs Stress(Etn(σ))3 entries | Curve (12 pts) | ksi | 21°C · L | — | |
| ↳ | Curve (17 pts) | ksi | 21°C · LT | — | |
| ↳ | Curve (13 pts) | ksi | 21°C · ST | — | |
Compressive Yield Strength(Fcy) | — | ksi | 36 entriesClick to expand | ||
Elongation at Break(εf) | — | - | 18 entriesClick to expand | ||
Fatigue Crack Growth Rate(da/dN)4 entries | Curve (86 pts) | m/cycle | 21°C | — | |
| ↳ | Curve (120 pts) | m/cycle | 21°C | — | |
| ↳ | Curve (85 pts) | m/cycle | 21°C | — | |
| ↳ | Curve (8 pts) | m/cycle | 21°C | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet | — | |
Ultimate Shear Strength(Fsu) | — | ksi | 12 entriesClick to expand | ||
S–N Curve (Wöhler)(S–N) | — | ksi | 13 entriesClick to expand | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 6 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | — | ksi | 36 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | — | ksi | 36 entriesClick to expand | ||
Young's Modulus(E) | — | ksi | 22°C · Sheet | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.