7075 Aluminum T7351
metalUNS A97075
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Bar/Rod | — | |
Fatigue Crack Growth Rate(da/dN) | — | m/cycle | 9 entriesClick to expand | ||
Poisson's Ratio(ν) | — | - | 22°C | — | |
Residual Strength vs Initial Crack Length(Fr(2a0))2 entries | Curve (7 pts) | Pa | 21°C | — | |
| ↳ | Curve (16 pts) | Pa | 21°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Bar/Rod | — | |
Young's Modulus(E) | — | Pa | 22°C · Bar/Rod | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (5 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (5 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (4 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.