7050 Aluminum T6151
metal7050 Aluminum T6151 is a high-strength Al-Zn-Mg-Cu alloy in the overaged temper condition, providing ultimate tensile strength of ~495–570 MPa with improved stress-corrosion cracking (SCC) resistance and fracture toughness compared to peak-hardened T6 condition. Specified in military applications including aircraft structures and fasteners where damage tolerance and resistance to sustained-load SCC are critical requirements.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Hand Forging | — | |
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (10 pts) | Pa | 21°C · L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Hand Forging | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (7 pts) | Pa | 21°C · L | — | |
Young's Modulus(E) | — | Pa | 22°C · Hand Forging | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.