7049/7149 Aluminum T7351 is a high-strength aluminum-zinc-magnesium-copper alloy in overaged condition, providing improved stress-corrosion cracking (SCC) resistance compared to T73 while maintaining tensile strength suitable for critical aerospace structures. This temper is used in damage-tolerant airframe applications requiring reduced SCC susceptibility and enhanced fracture toughness in thick sections.
Compliance & Regulations
15 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 106 – 146 | ksi | 8 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | 83.00 – 106 | ksi | 8 entriesClick to expand | ||
Compressive Modulus(Ec) | 10,600 | ksi | 22°C · Hand forging | ||
Compressive Tangent Modulus vs Stress(Etn(σ))4 entries | Curve (33 pts) | ksi | 21°C · L | ||
| ↳ | Curve (33 pts) | ksi | 21°C · LT | ||
| ↳ | Curve (33 pts) | ksi | 21°C · ST | ||
| ↳ | Curve (33 pts) | ksi | 21°C · L | ||
Compressive Yield Strength(Fcy) | 58.00 – 69.00 | ksi | 16 entriesClick to expand | ||
Elongation at Break(εf) | 2.000 – 8.000 | - | 14 entriesClick to expand | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 3,900 | ksi | 22°C · Die forging | ||
Ultimate Shear Strength(Fsu) | 38.00 – 41.00 | ksi | 5 entriesClick to expand | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 8 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | 63.00 – 74.00 | ksi | 21 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 54.00 – 65.00 | ksi | 21 entriesClick to expand | ||
Young's Modulus(E) | 10,200 | ksi | 22°C · Die forging | ||
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1030 | lb/in³ | 22°C |