6151 Aluminum T6

Verifiedmetal

6151-T6 is a heat-treated aluminum alloy (Al-Mg-Si) used in aerospace forgings that achieves high strength through solution heat treatment and artificial aging. T6 temper provides enhanced yield strength and tensile strength suitable for structural aircraft components requiring good fatigue resistance and moderate corrosion resistance.

aerospacestructural

Compliance & Regulations

?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65

6151 Aluminum/6151 Aluminum T6

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Orientation

Property	Value	Unit	Conditions
Compressive Modulus(Ec)	10,300	ksi	22°C · Die forging
Compressive Yield Strength(Fcy)2 entries	39.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · L · t=≤4.000 in
↳	35.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · LT · t=≤4.000 in
Elongation at Break(εf)2 entries	10.00	-	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · L · t=≤4.000 in
↳	6.000	-	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · LT · t=≤4.000 in
Poisson's Ratio(ν)	0.3300	-	22°C
Shear Modulus(G)	3,850	ksi	22°C · Die forging
Ultimate Shear Strength(Fsu)	28.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · t=≤4.000 in
Ultimate Tensile Strength(σUTS)2 entries	44.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · L · t=≤4.000 in
↳	44.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · LT · t=≤4.000 in
Yield Strength (0.2% offset)(σy)2 entries	37.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · L · t=≤4.000 in
↳	37.00	ksi	22°C · Die forging · T6 · AMS 4125 OR AMS-A-22771 · LT · t=≤4.000 in
Young's Modulus(E)	10,100	ksi	22°C · Die forging

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

1 interactive curve for this material

Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.

Create free account

Property	Value	Unit	Conditions	Source
CTE vs Temperature(α(T))	Curve (5 pts)	µin/in·°F	—

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	0.09800	lb/in³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

Safety & Biocompatibility

Quality & Standards

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

6151 Aluminum T6

Mechanical Properties

Thermal Properties

Physical Properties

Regulatory Screening

Environmental

Safety & Biocompatibility

Quality & Standards