5454 Aluminum H34
VerifiedmetalUNS A95454
5454 aluminum alloy is a non-heat-treatable Al-Mg system (3–5% Mg) offering excellent seawater corrosion resistance and weldability, commonly used in marine and chemical handling applications. The H34 temper (strain-hardened and partially annealed) provides moderate strength with maintained ductility, suitable for sheet and plate fabrication where corrosion resistance and formability are prioritized over maximum strength.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
e/D Ratio
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)2 entries | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · t=0.020-1.000 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · t=0.020-1.000 in · e/D=2 | — | |
Bearing Yield Strength(Fbry)2 entries | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · t=0.020-1.000 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · t=0.020-1.000 in · e/D=2 | — | |
Compressive Modulus(Ec) | Curve (19 pts) | ksi | — | — | |
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (12 pts) | ksi | 21°C · L | — | |
| ↳ | Curve (11 pts) | ksi | 21°C · LT | — | |
Compressive Yield Strength(Fcy)2 entries | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · L · t=0.020-1.000 in | — | |
| ↳ | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · LT · t=0.020-1.000 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet/Plate | — | |
Ultimate Shear Strength(Fsu) | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · t=0.020-1.000 in | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 5 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | — | ksi | 11 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy)2 entries | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · L · t=0.020-1.000 in | — | |
| ↳ | — | ksi | 22°C · Sheet/Plate · H34 · AMS-QQ-A-250/10 · LT · t=0.020-1.000 in | — | |
Young's Modulus(E) | — | ksi | 22°C · Sheet/Plate | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.