5086 aluminum is a non-heat-treatable Al-Mg alloy (nominally 3-4% Mg) with excellent seawater corrosion resistance and moderate strength, commonly used in marine vessels, automotive fuel tanks, and pressure vessels; H112 temper provides stress-relieved, partially annealed conditions suitable for applications requiring improved dimensional stability after fabrication while maintaining workability for extrusions and plate stock.
Compliance & Regulations
6 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 165.5 – 496.4 | MPa | 8 entriesClick to expand | ||
Bearing Yield Strength(Fbry)4 entries | 213.7 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=0.188-0.499 in · e/D=1.5 | ||
| ↳ | 193.1 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=0.500-1.00 in · e/D=1.5 | ||
| ↳ | 193.1 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=1.001-2.000 in · e/D=1.5 | ||
| ↳ | 193.1 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=2.001-3.000 in · e/D=1.5 | ||
Compressive Modulus(Ec) | 71.71 | GPa | 22°C · Sheet/Plate | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (10 pts) | Pa | 21°C · L | ||
| ↳ | Curve (13 pts) | Pa | 21°C · LT | ||
Compressive Yield Strength(Fcy) | 96.53 – 151.7 | MPa | 12 entriesClick to expand | ||
Elongation at Break(εf) | 8.000 – 14.00 | - | 5 entriesClick to expand | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 26.54 | GPa | 22°C · Sheet/Plate | ||
Ultimate Shear Strength(Fsu)4 entries | 372.3 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=0.188-0.499 in | ||
| ↳ | 358.5 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=0.500-1.00 in | ||
| ↳ | 358.5 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=1.001-2.000 in | ||
| ↳ | 351.6 | MPa | 22°C · Sheet/Plate · H112 · AMS-QQ-A-250/7 · t=2.001-3.000 in | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (9 pts) | Pa | 21°C · L | ||
| ↳ | Curve (10 pts) | Pa | 21°C · L | ||
| ↳ | Curve (9 pts) | Pa | 21°C · LT | ||
| ↳ | Curve (9 pts) | Pa | 21°C · LT | ||
Ultimate Tensile Strength(σUTS) | 234.4 – 248.2 | MPa | 9 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 96.53 – 124.1 | MPa | 9 entriesClick to expand | ||
Young's Modulus(E) | 70.33 | GPa | 22°C · Sheet/Plate | ||
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | 1/K | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 2.657 | kg/m³ | 22°C |