5086 Aluminum H111
Verifiedmetal5086 aluminum is an Al-Mg alloy (nominally 4.0-4.9% Mg) widely used in marine, automotive, and pressure vessel applications for its superior seawater corrosion resistance and moderate strength. The H111 temper (strain-hardened and partially annealed) provides moderate strength with good formability, suitable for extruded components requiring a balance of workability and structural performance.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Sheet/Plate | — | |
Elongation at Break(εf) | — | - | 22°C · Extrusion · H111 · AMS-QQ-A-200/5 · L · t=≤5.000a in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Sheet/Plate | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 22°C · Extrusion · H111 · AMS-QQ-A-200/5 · L · t=≤5.000a in | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 22°C · Extrusion · H111 · AMS-QQ-A-200/5 · L · t=≤5.000a in | — | |
Young's Modulus(E) | — | ksi | 22°C · Sheet/Plate | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (17 pts) | µin/in·°F | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (20 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.