359.0 Aluminum Casting T6
Verifiedmetal359.0 is a silicon-copper aluminum casting alloy (Si ~8.5%, Cu ~1%) in T6 condition (solution heat-treated and artificially aged), providing moderate strength suitable for engine blocks, cylinder heads, and transmission housings in automotive and aerospace applications with good castability and thermal fatigue resistance up to approximately 200°C.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
e/D Ratio
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)2 entries | — | ksi | 22°C · Casting · T6 · AMS-A-21180 · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Casting · T6 · AMS-A-21180 · e/D=2 | — | |
Bearing Yield Strength(Fbry)2 entries | — | ksi | 22°C · Casting · T6 · AMS-A-21180 · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Casting · T6 · AMS-A-21180 · e/D=2 | — | |
Compressive Modulus(Ec) | — | ksi | 22°C · Casting | — | |
Compressive Yield Strength(Fcy) | — | ksi | 22°C · Casting · T6 · AMS-A-21180 | — | |
Elongation at Break(εf) | — | - | 22°C · Casting · T6 · AMS-A-21180 | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | ksi | 22°C · Casting | — | |
Ultimate Shear Strength(Fsu) | — | ksi | 22°C · Casting · T6 · AMS-A-21180 | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 22°C · Casting · T6 · AMS-A-21180 | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | 22°C · Casting · T6 · AMS-A-21180 | — | |
Young's Modulus(E) | — | ksi | 22°C · Casting | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.