316L Stainless Steel (BJT, Desktop Metal 316L Stainless Steel (Shop System), sintered) — Properties & Data | MatWorld

316L Stainless Steel (BJT, Desktop Metal 316L Stainless Steel (Shop System), sintered)

UNS S31603· 316L Stainless Steel (Shop System)

Desktop Metal 316L Stainless Steel (Shop System) is that maker's grade of low-carbon austenitic 316L stainless steel for binder jetting, used in the sintered condition. Parts are printed as green bodies of binder-held powder, then depowdered and furnace-sintered. They shrink substantially as they densify, so designs must allow for shrinkage and sagging. The sintered structure is equiaxed austenite with some residual porosity, more uniform between build directions than laser-melted 316L, and it needs no supports and carries little residual stress. Typical uses are production runs of small brackets, fluid fittings, hardware and tooling parts that would otherwise be machined, cast or metal injection molded. Every value on this page is read from Desktop Metal's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

small bracketsfluid fittingshardwaretooling parts

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

316L Stainless Steel (BJT)/316L Stainless Steel (BJT, Desktop Metal 316L Stainless Steel (Shop System), sintered)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Table

Orientation

Specification

Property	Value	Unit	Conditions
Charpy Impact Energy(KV)2 entries	222 range 217–227	J	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered · MPIF 59
↳	208 range 192–224	J	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · MPIF 59 · XY
Elongation at Break(εf)2 entries	77.30 range 72.30–82.30	%	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered · ASTM E8/E8M · XY
↳	59.00 range 39.00–79.00	%	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · ASTM E8M · XY
Ultimate Tensile Strength(σUTS)2 entries	78.32 range 76.72–79.92	ksi	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered · ASTM E8/E8M · XY
↳	75.56 range 71.50–79.63	ksi	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · ASTM E8M · XY
Yield Strength (0.2% offset)(σy)2 entries	26.83 range 25.24–28.43	ksi	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered · ASTM E8/E8M · XY
↳	26.25 range 25.53–26.98	ksi	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · ASTM E8M · XY
Young's Modulus(E)2 entries	27,267.1	ksi	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered · ASTM E111 · XY
↳	26,541.9 range 24,511.4–28,572.4	ksi	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · ASTM E111 · XY

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Filter by

Statistic

Table

Specification

Property	Value	Unit	Conditions	Source
Density(ρ)2 entries	0.2814 range 0.2782–0.2847	lb/in³	MECHANICAL PROPERTIES IN DESKTOP METAL PURESINTER FURNACE · sintered
↳	0.2789 range 0.2753–0.2825	lb/in³	MECHANICAL PROPERTIES SINTERED IN THIRD-PARTY COMMERCIAL FURNACE · sintered · ASTM B311

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.