280 Maraging Steel Maraged 900°F
Verifiedmetal280 Maraging Steel aged at 900°F is a nickel-cobalt-molybdenum maraging steel offering ultra-high strength (typically 280 ksi yield) with exceptional toughness and fracture resistance, primarily used in aerospace structures, die-casting dies, and precision tooling. This aging condition provides optimal strength-to-toughness balance through controlled precipitation hardening, with good dimensional stability and machinability.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
Thickness
e/D Ratio
Orientation
Specification
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)4 entries | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=2 | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=2 | — | |
Bearing Yield Strength(Fbry)4 entries | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=1.5 | — | |
| ↳ | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=2 | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=2 | — | |
Compressive Modulus(Ec) | — | ksi | 22°C · Sheet | — | |
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (12 pts) | ksi | 21°C · L | — | |
Compressive Yield Strength(Fcy)4 entries | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · L · t=≤0.187 in | — | |
| ↳ | — | ksi | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in | — | |
| ↳ | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · LT · t=≤0.187 in | — | |
Elongation at Break(εf)4 entries | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=4.000-10.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=<4.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=4.000-10.000 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Reduction of Area(RA)4 entries | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=4.000-10.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=<4.000 in | — | |
| ↳ | — | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=4.000-10.000 in | — | |
Ultimate Shear Strength(Fsu)3 entries | — | ksi | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in | — | |
| ↳ | — | ksi | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in | — | |
| ↳ | — | ksi | 22°C · Bar · Maraged at 900°F · AMS 6514 · t=<4.000 in | — | |
Stress–Strain Curve(σ–ε) | Curve (12 pts) | ksi | 21°C · L | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (7 pts) | ksi | -73°C · L | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | 9 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | — | ksi | 9 entriesClick to expand | ||
Young's Modulus(E) | — | ksi | 22°C · Sheet | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (21 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (13 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (9 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.