280 Maraging Steel aged at 900°F is a nickel-cobalt-molybdenum maraging steel offering ultra-high strength (typically 280 ksi yield) with exceptional toughness and fracture resistance, primarily used in aerospace structures, die-casting dies, and precision tooling. This aging condition provides optimal strength-to-toughness balance through controlled precipitation hardening, with good dimensional stability and machinability.
Compliance & Regulations
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)4 entries | 2.475 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=1.5 | ||
| ↳ | 2.661 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=1.5 | ||
| ↳ | 3.358 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=2 | ||
| ↳ | 3.392 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=2 | ||
Bearing Yield Strength(Fbry)4 entries | 2.110 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=1.5 | ||
| ↳ | 2.461 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=1.5 | ||
| ↳ | 2.682 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in · e/D=2 | ||
| ↳ | 2.689 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in · e/D=2 | ||
Compressive Modulus(Ec) | 197.2 | GPa | 22°C · Sheet | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (12 pts) | Pa | 21°C · L | ||
Compressive Yield Strength(Fcy)4 entries | 1.682 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · L · t=≤0.187 in | ||
| ↳ | 1.937 | GPa | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | ||
| ↳ | 1.937 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in | ||
| ↳ | 1.710 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · LT · t=≤0.187 in | ||
Elongation at Break(εf)4 entries | 5.000 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | ||
| ↳ | 4.000 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=4.000-10.000 in | ||
| ↳ | 4.000 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=<4.000 in | ||
| ↳ | 2.000 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=4.000-10.000 in | ||
Poisson's Ratio(ν) | 0.3100 | - | 22°C | ||
Reduction of Area(RA)4 entries | 30.00 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=<4.000 in | ||
| ↳ | 25.00 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · L · t=4.000-10.000 in | ||
| ↳ | 25.00 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=<4.000 in | ||
| ↳ | 20.00 | - | 22°C · Bar · Maraged at 900°F · AMS 6514 · LT · t=4.000-10.000 in | ||
Ultimate Shear Strength(Fsu)3 entries | 1.124 | GPa | 22°C · Sheet · Maraged at 900°F · AMS 6521a · t=≤0.187 in | ||
| ↳ | 1.172 | GPa | 22°C · Plate · Maraged at 900°F · AMS 6521a · t=0.188-0.250 in | ||
| ↳ | 1.117 | GPa | 22°C · Bar · Maraged at 900°F · AMS 6514 · t=<4.000 in | ||
Stress–Strain Curve(σ–ε) | Curve (12 pts) | Pa | 21°C · L | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (7 pts) | Pa | -73°C · L | ||
Ultimate Tensile Strength(σUTS) | 1.868 – 1.931 | GPa | 9 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 1.806 – 1.862 | GPa | 9 entriesClick to expand | ||
Young's Modulus(E) | 182.7 | GPa | 22°C · Sheet | ||
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (21 pts) | 1/K | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (13 pts) | J/(kg·K) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (9 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 7.916 | kg/m³ | 22°C |