2024 Aluminum T851X
metal2024-T851X is an age-hardened aluminum-copper alloy (4.4% Cu, 1.5% Mg, 0.6% Mn) in a stress-relieved condition achieved through controlled stretching after solution heat treatment and artificial aging, delivering high strength (yield ~405 MPa, ultimate ~485 MPa) with improved stress-corrosion cracking resistance compared to T4 variants. Primary applications include aircraft fuselage skins, stringers, and other structural components requiring fatigue and damage-tolerance performance in the -55°C to +120°C operating range.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Drawn tubing | — | |
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (12 pts) | Pa | 21°C · L | — | |
| ↳ | Curve (10 pts) | Pa | 21°C · LT | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Drawn tubing | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (8 pts) | Pa | 21°C · L | — | |
| ↳ | Curve (8 pts) | Pa | 21°C · L | — | |
| ↳ | Curve (7 pts) | Pa | 21°C · LT | — | |
| ↳ | Curve (7 pts) | Pa | 21°C · LT | — | |
Ultimate Tensile Strength(σUTS) | Curve (20 pts) | Pa | L | — | |
Young's Modulus(E) | — | Pa | 22°C · Drawn tubing | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (12 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (11 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.