2024-T851 is a precipitation-hardened aluminum-copper alloy (4.4% Cu, 1.5% Mg, 0.6% Mn) that combines high strength with controlled ductility through solution treatment, controlled cold work, and stress relief; primary applications include aircraft fuselage skin, wing components, and structural fasteners requiring fatigue resistance and damage tolerance in the -65°F to +250°F service range.
Compliance & Regulations
9 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | 10,700 | ksi | 22°C · Drawn tubing | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (9 pts) | ksi | 21°C · L | ||
| ↳ | Curve (9 pts) | ksi | 21°C · LT | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 4,000 | ksi | 22°C · Drawn tubing | ||
Stress–Strain Curve(σ–ε)2 entries | Curve (13 pts) | ksi | 21°C · L | ||
| ↳ | Curve (11 pts) | ksi | 21°C · LT | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (6 pts) | ksi | 21°C · L | ||
| ↳ | Curve (7 pts) | ksi | 21°C · L | ||
| ↳ | Curve (6 pts) | ksi | 21°C · LT | ||
| ↳ | Curve (7 pts) | ksi | 21°C · LT | ||
Ultimate Tensile Strength(σUTS) | Curve (20 pts) | ksi | L | ||
Young's Modulus(E) | 10,500 | ksi | 22°C · Drawn tubing |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (12 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (11 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1000 | lb/in³ | 22°C |