2014 Aluminum
Verifiedmetal· 2014· 2014 Aluminum Alloy
**2014 Aluminum** 2014 is a copper-alloyed aluminum alloy used primarily in aircraft fuselage and structural applications where moderate-to-high strength and good machinability are required. The alloy offers strength comparable to 2024 with superior machinability, typical yield strengths of 60–70 ksi depending on temper, and moderate corrosion resistance requiring protective cladding or coatings in service.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec)4 entries | — | ksi | 22°C · Bar/Extrusion/Rod | — | |
| ↳ | — | ksi | 22°C · Die forging | — | |
| ↳ | — | ksi | 22°C · Bar/Rod | — | |
| ↳ | Curve (13 pts) | ksi | L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G)2 entries | — | ksi | 22°C · Bar/Extrusion/Rod | — | |
| ↳ | — | ksi | 22°C · Bar/Rod | — | |
Young's Modulus(E)3 entries | — | ksi | 22°C · Bar/Extrusion/Rod | — | |
| ↳ | — | ksi | 22°C · Bar/Rod | — | |
| ↳ | Curve (13 pts) | ksi | L | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (12 pts) | BTU/(lb·°F) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | BTU/(hr·ft·°F) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.