2014 aluminum is a copper-alloyed high-strength aluminum used primarily in aircraft structural forgings and landing gear components, offering tensile strengths in the 60–70 ksi range with good fatigue resistance. The T652 temper (solution heat-treated, stress-relieved, and artificially aged) provides dimensional stability and controlled strength suitable for precision forged parts requiring consistent mechanical properties and minimal distortion.
Compliance & Regulations
11 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru) | 83.00 – 127 | ksi | 17 entriesClick to expand | ||
Bearing Yield Strength(Fbry) | 71.00 – 94.00 | ksi | 24 entriesClick to expand | ||
Compressive Modulus(Ec) | 11,000 | ksi | 22°C · Bar/Extrusion/Rod | ||
Compressive Tangent Modulus vs Stress(Etn(σ))3 entries | Curve (7 pts) | ksi | 21°C · L | ||
| ↳ | Curve (7 pts) | ksi | 21°C · LT | ||
| ↳ | Curve (8 pts) | ksi | 21°C · ST | ||
Compressive Yield Strength(Fcy) | 39.00 – 62.00 | ksi | 35 entriesClick to expand | ||
Elongation at Break(εf) | 1.000 – 8.000 | - | 30 entriesClick to expand | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 4,100 | ksi | 22°C · Bar/Extrusion/Rod | ||
Ultimate Shear Strength(Fsu) | 36.00 – 94.00 | ksi | 12 entriesClick to expand | ||
Stress–Strain Curve(σ–ε)2 entries | Curve (11 pts) | ksi | 21°C · L | ||
| ↳ | Curve (10 pts) | ksi | 21°C · LT | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | — | ksi | 6 entriesClick to expand | ||
Ultimate Tensile Strength(σUTS) | 57.00 – 67.00 | ksi | 32 entriesClick to expand | ||
Yield Strength (0.2% offset)(σy) | 48.00 – 59.00 | ksi | 33 entriesClick to expand | ||
Young's Modulus(E) | 10,800 | ksi | 22°C · Bar/Extrusion/Rod | ||
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (12 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1010 | lb/in³ | 22°C |