2014 Aluminum T651 is a copper-alloyed aerospace aluminum with solution heat treatment, stress relief, and artificial aging, delivering tensile strength of approximately 70–75 ksi with enhanced fatigue resistance and dimensional stability for structural aircraft components. The T651 temper provides improved crack resistance compared to T4 while maintaining good machinability, making it suitable for forged and machined airframe fittings, wings, and fuselage sections where fatigue and sustained loads are critical.
Compliance & Regulations
6 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | 11,000 | ksi | 22°C · Bar/Extrusion/Rod | ||
Compressive Tangent Modulus vs Stress(Etn(σ))2 entries | Curve (7 pts) | ksi | 21°C · L | ||
| ↳ | Curve (8 pts) | ksi | 21°C · LT | ||
Poisson's Ratio(ν) | 0.3300 | - | 22°C | ||
Shear Modulus(G) | 4,100 | ksi | 22°C · Bar/Extrusion/Rod | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))4 entries | Curve (5 pts) | ksi | 21°C · LT | ||
| ↳ | Curve (5 pts) | ksi | 21°C · L | ||
| ↳ | Curve (6 pts) | ksi | 21°C · L | ||
| ↳ | Curve (6 pts) | ksi | 21°C · LT | ||
Young's Modulus(E) | 10,800 | ksi | 22°C · Bar/Extrusion/Rod |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (15 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (12 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.1010 | lb/in³ | 22°C |