17-4PH H1150 is a precipitation-hardened martensitic stainless steel (17% Cr, 4% Ni, Cu-strengthened) designed for high-strength aerospace and defense applications requiring corrosion resistance up to ~300°C. The H1150 condition (solution-treated and aged at 1150°F) provides ultrahigh yield strength (typically 1310 MPa) with moderate elongation, making it suitable for critical fasteners, shafts, and structural components in gas turbines and aircraft engines.
Compliance & Regulations
6 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | Curve (10 pts) | ksi | — | ||
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (12 pts) | ksi | 21°C · L | ||
Elongation at Break(εf) | 16.00 | - | 22°C · Forging/Tubing · H1150 · AMS 5643 · L · t=<8.000 in | ||
Poisson's Ratio(ν) | 0.2700 | - | 22°C | ||
Shear Modulus(G) | 12,700 | ksi | 22°C · Investment Casting | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))2 entries | Curve (7 pts) | ksi | 21°C · L | ||
| ↳ | Curve (32 pts) | ksi | 21°C · L | ||
Ultimate Tensile Strength(σUTS)3 entries | 135 | ksi | 22°C · Sheet/Strip/Plate · H1150 · AMS 5604 · LT · t=≤4.000 in | ||
| ↳ | 135 | ksi | 22°C · Forging/Tubing · H1150 · AMS 5643 · L · t=<8.000 in | ||
| ↳ | Curve (9 pts) | ksi | L | ||
Yield Strength (0.2% offset)(σy)3 entries | 105 | ksi | 22°C · Sheet/Strip/Plate · H1150 · AMS 5604 · LT · t=≤4.000 in | ||
| ↳ | 105 | ksi | 22°C · Forging/Tubing · H1150 · AMS 5643 · L · t=<8.000 in | ||
| ↳ | Curve (10 pts) | ksi | L | ||
Young's Modulus(E) | 28,500 | ksi | 22°C · Sheet/Strip/Plate |
3 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (8 pts) | µin/in·°F | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (17 pts) | BTU/(lb·°F) | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (17 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2820 | lb/in³ | 22°C |