17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, heat-treated) — Properties & Data | MatWorld

17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, heat-treated)

UNS S17400· Ultrafuse 17-4 PH

BASF Forward AM Ultrafuse 17-4 PH, heat-treated, is 17-4PH stainless steel printed by material extrusion from a metal-filled polymer filament, then debound, sintered and given a precipitation-hardening heat treatment. The printed green part is oversized to allow for shrinkage during sintering. The sintered metal keeps some residual porosity and the layered surface texture of extrusion, so features needing tight tolerances are usually machined. The ageing treatment after sintering hardens the martensitic matrix by copper-rich precipitation, raising strength and hardness over the as-sintered state. Parts are used for tooling, jigs, fixtures, functional prototypes and low-volume metal components. Every value on this page is read from BASF Forward AM's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

toolingjigsfixturesfunctional prototypeslow-volume metal components

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

17-4PH Stainless Steel (FDM)/17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH, heat-treated)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Orientation

Specification

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	6.000	%	heat-treated · ISO 6892 - 1 · XY
↳	7.000	%	heat-treated · ISO 6892 - 1 · Z
Hardness (Vickers)(HV)2 entries	400	HV	heat-treated · ISO 6507 - 1 · XY
↳	426	HV	heat-treated · ISO 6507 - 1 · Z
Ultimate Tensile Strength(σUTS)2 entries	1.276	GPa	heat-treated · ISO 6892 - 1 · XY
↳	1.319	GPa	heat-treated · ISO 6892 - 1 · Z
Yield Strength (0.2% offset)(σy)2 entries	1.109	GPa	heat-treated · ISO 6892 - 1 · XY
↳	1.136	GPa	heat-treated · ISO 6892 - 1 · Z
Young's Modulus(E)2 entries	198.0	GPa	heat-treated · ISO 527 · XY
↳	202.0	GPa	heat-treated · ISO 527 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	7.806	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.