15-5PH stainless steel in the STA (solution-treated and aged) condition is a martensitic precipitation-hardening stainless steel with nominal composition of 15% Cr, 5% Ni, and 2.5% Cu, providing high strength (typically 1310 MPa yield minimum) and good corrosion resistance in marine and aerospace applications up to approximately 300°C.
Compliance & Regulations
1 interactive curve for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | 29,200 | ksi | 22°C · Bar | ||
Poisson's Ratio(ν) | 0.2700 | - | 22°C | ||
Shear Modulus(G) | 11,200 | ksi | 22°C · Bar | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (35 pts) | ksi | 21°C · L | ||
Young's Modulus(E) | 28,500 | ksi | 22°C · Bar |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (11 pts) | µin/in·°F | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (9 pts) | BTU/(hr·ft·°F) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 0.2830 | lb/in³ | 22°C |