15-5PH Stainless Steel H925
Verifiedmetal15-5PH H925 is a precipitation-hardened martensitic stainless steel (15% Cr, 5% Ni) in the H925 condition—solution heat-treated, cold-worked, and aged at 925°F—providing yield strength of approximately 170 ksi with good corrosion resistance and fracture toughness for aerospace fasteners and structural components operating to moderate temperatures. This condition balances high strength with ductility suitable for applications requiring reliable fatigue performance in saltwater and mildly corrosive environments.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | ksi | 22°C · Bar | — | |
Elongation at Break(εf)2 entries | — | - | 22°C · Bar · H925 · AMS 5659 · L · t=≤12 in | — | |
| ↳ | — | - | 22°C · Bar · H925 · AMS 5659 · LT · t=≤12 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Reduction of Area(RA)2 entries | — | - | 22°C · Bar · H925 · AMS 5659 · L · t=≤12 in | — | |
| ↳ | — | - | 22°C · Bar · H925 · AMS 5659 · LT · t=≤12 in | — | |
Shear Modulus(G) | — | ksi | 22°C · Bar | — | |
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain)) | Curve (35 pts) | ksi | 21°C · L | — | |
Ultimate Tensile Strength(σUTS)3 entries | — | ksi | 22°C · Bar · H925 · AMS 5659 · L · t=≤12 in | — | |
| ↳ | — | ksi | 22°C · Bar · H925 · AMS 5659 · LT · t=≤12 in | — | |
| ↳ | Curve (10 pts) | ksi | L | — | |
Yield Strength (0.2% offset)(σy)3 entries | — | ksi | 22°C · Bar · H925 · AMS 5659 · L · t=≤12 in | — | |
| ↳ | — | ksi | 22°C · Bar · H925 · AMS 5659 · LT · t=≤12 in | — | |
| ↳ | Curve (10 pts) | ksi | L | — | |
Young's Modulus(E) | — | ksi | 22°C · Bar | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (11 pts) | µin/in·°F | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (9 pts) | BTU/(hr·ft·°F) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | lb/in³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.