11Cr-10Ni Austenitic Stainless (var. 16)
metalAn austenitic stainless steel with 11% chromium and ~10% nickel, stabilized with molybdenum and trace elements (aluminum, titanium, vanadium) for enhanced corrosion resistance and strength. This is a lean-austenite variant designed to balance cost and performance, offering moderate strength with good ductility and resistance to chloride stress-corrosion cracking compared to standard 300-series stainless steels. Used where higher strength and pitting resistance are needed without the full expense of super-austenitic or duplex grades, particularly in marine, chemical processing, and mildly aggressive industrial environments.
marine hardware and fastenerschemical processing equipmentpressure vesselspump and valve bodiescoastal infrastructurefood processing equipment
Compliance & Regulations
?ISO 10993?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Elongation at Break(εf) | — | - | — | — | |
Ultimate Tensile Strength(σUTS) | — | ksi | — | — | |
Yield Strength (0.2% offset)(σy) | — | ksi | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.