103,444 materials
PH15-7Mo is a precipitation-hardening martensitic stainless steel containing 15% chromium, 7% molybdenum, and aluminum as a strengthening agent, offering high strength and corrosion resistance for aerospace and fastener applications. The F condition (as-forged) represents the material in its initial forged state prior to heat treatment, providing baseline mechanical properties and serving as a reference condition before applying precipitation-hardening cycles.
PH15-7Mo is a precipitation-hardening stainless steel containing 15% Cr, 7% Mo, and additions of Al and Ti that enable age hardening to high strength levels while maintaining austenitic stability and corrosion resistance; the Sta (standard annealed) condition provides a soft, ductile starting state prior to precipitation hardening, typically used for forming and machining operations before final age-hardening to achieve tensile strengths of 140–180 ksi depending on the aging temperature selected.
PH2F3 is a phosphate-based ceramic compound, likely a phosphate fluoride phase with potential applications in specialized functional ceramics. While specific commercial prevalence data is limited, phosphate ceramics in this composition family are explored for applications requiring chemical stability, thermal management, or biocompatibility, particularly in research and emerging industrial sectors where traditional oxide ceramics may be inadequate.
PH2NO2 is a ceramic compound in the phosphorus-nitrogen oxide family, likely developed for specialized high-temperature or chemically demanding applications. While not a widely commercialized material, ceramics in this composition range are primarily investigated for refractory properties, advanced catalyst supports, or specialized electrical/thermal management applications where conventional oxides prove insufficient. Engineers would consider this material when standard alumina or silicate ceramics cannot meet chemical stability, thermal cycling resistance, or functional property requirements in niche industrial processes.
PH3 (phosphine) is an inorganic ceramic compound that exists primarily as a gas under standard conditions, though it can be stabilized in solid or complexed forms for specific applications. This material is notable for its use in semiconductor processing, particularly in the doping and epitaxial growth of III-V compound semiconductors like gallium arsenide and indium phosphide. Engineers select PH3 in high-precision electronics manufacturing where controlled phosphorus doping is critical, and its low density and specific elastic properties make it valuable in applications requiring lightweight, chemically precise deposition—though handling demands careful safety protocols due to its toxicity.
PH3O4 is a mixed-valence phosphorus oxide ceramic compound belonging to the family of phosphate-based ceramics. This material is primarily of research and development interest rather than a widely established commercial ceramic, with potential applications in specialized contexts where phosphorus oxide chemistry offers distinct advantages such as chemical reactivity, thermal properties, or ion-exchange capabilities.
PH4Br is a phosphonium halide ceramic compound belonging to the family of organic-inorganic hybrid perovskites and halide-based materials. This compound is primarily of research interest rather than established industrial production, investigated for its potential in optoelectronic and photonic applications due to the structural and electronic properties typical of halide perovskite systems. The material's ceramic character and halide composition position it as a candidate for emerging applications in semiconductor devices, though practical engineering deployment remains limited compared to conventional ceramics.
PH4F is a ceramic material, likely a phosphate-based or fluoride-containing compound, though its exact composition is not specified in standard references. This material family is typically employed in applications requiring thermal stability, chemical resistance, or electrical properties that exceed those of conventional polymers or metals. PH4F may be used in specialized thermal management, electrical insulation, or biomedical applications where ceramics offer advantages in biocompatibility or thermal cycling resistance; however, without confirmed composition data, engineers should verify material specifications directly with suppliers or technical datasheets before design selection.
PH4I is a phosphate-based ceramic compound, likely an inorganic phosphate material belonging to the family of phosphide or phosphate ceramics. These materials are typically valued for their thermal stability, chemical resistance, and structural applications in high-temperature or corrosive environments. The compound finds application in specialized industrial ceramics, refractory systems, and potentially in biomedical or electronic device contexts where phosphate chemistry offers advantages over traditional oxide ceramics.
PH4NO2F2 is a fluoride-based ceramic compound containing phosphorus, nitrogen, and fluorine elements. This material belongs to the phosphorus-nitrogen-fluorine ceramic family, which is of interest in materials research for applications requiring chemical stability and thermal resistance. While not widely established in mainstream industrial production, compounds in this class are being investigated for specialized applications where fluoride ceramics' unique properties—including chemical inertness, thermal stability, and potential optical or electrical characteristics—offer advantages over conventional ceramics.
PH5N2O4 is a phosphate-nitride ceramic compound representing an experimental or specialized material within the phosphonitride ceramic family. This composition suggests potential applications in high-temperature or chemically demanding environments where phosphate-based ceramics offer thermal stability and corrosion resistance. Materials in this chemical family are primarily explored in research settings for advanced applications requiring thermal insulation, protective coatings, or specialized functional ceramics, though wider industrial adoption depends on synthesis scalability and cost-effectiveness relative to established alternatives.
PH6N2O2 is a phosphorus-nitrogen-oxygen ceramic compound, likely representing a phosphazene or phosphonitride-based ceramic material. This composition family is primarily of research and developmental interest rather than a widely established commercial ceramic, with potential applications in advanced ceramic composites and specialized thermal or chemical-resistant coatings.
PH6N3O is a phosphate-based ceramic compound belonging to the family of phosphate glasses or glass-ceramics, characterized by a phosphorus-oxygen network modified with additional elements. This material class is primarily valued in biomedical and specialty applications where biocompatibility, chemical durability, and controlled dissolution rates are critical; it competes with silicate glasses and hydroxyapatite-based ceramics in applications requiring resorbable or bioactive behavior. The relatively low density of this material makes it attractive for load-bearing biomedical devices where weight reduction is beneficial without sacrificing structural integrity.
PH6NO2 is a phosphorus-nitrogen-oxygen ceramic compound, likely belonging to the phosphate or phosphonitride ceramic family. This material appears to be a specialized or research-phase ceramic rather than a commodity product, with potential applications in thermal management, structural composites, or specialized coatings where chemical stability and low density are advantageous. The specific chemistry suggests possible use in high-temperature environments or as a matrix phase in composite systems where traditional alumina or silicate ceramics may be unsuitable.
PH6NO4 is a phosphorus-nitrogen-oxygen ceramic compound, likely a phosphate or nitride-based ceramic material belonging to the family of advanced inorganic ceramics used in specialized applications. This composition suggests a material developed for niche engineering purposes, potentially in thermal, electrical, or chemical-resistant applications where conventional ceramics or polymers are insufficient. The specific formulation and industrial prevalence of this particular compound are not widely documented in mainstream engineering practice, indicating it may be a research compound, proprietary material, or application-specific ceramic developed for demanding environments.
PH8C2NO4 is a ceramic compound containing phosphorus, carbon, nitrogen, and oxygen elements, likely belonging to the phosphonitride or phosphate-based ceramic family. This material appears to be in the research or specialized application phase rather than a commodity ceramic. The combination of phosphorus and nitrogen suggests potential use in high-temperature applications, wear-resistant coatings, or advanced composites where thermal stability and chemical resistance are valued over traditional silicate ceramics.
PH8IN4 is a ceramic material from the phosphate or oxide ceramic family, likely engineered for thermal or chemical durability in demanding environments. While specific composition details are not available in standard references, ceramics with this designation are typically employed in high-temperature applications, refractory systems, or specialized industrial processes where thermal stability and resistance to chemical attack are critical performance requirements.
PH9N2O4 is a phosphate-based ceramic compound belonging to the family of inorganic phosphate ceramics, likely developed for specialized structural or functional applications. While the exact commercial designation and full composition are not specified, phosphate ceramics of this type are valued in industries requiring chemical resistance, thermal stability, or biocompatibility, and may serve roles where traditional silicate ceramics are inadequate.
PHA (polyhydroxyalkanoate) is a family of biodegradable thermoplastic polyesters synthesized by microorganisms or chemically derived from renewable biological sources. These materials are valued in applications requiring environmental degradation without sacrificing functional performance, offering a compostable alternative to conventional petroleum-based plastics while maintaining processability through standard injection molding and extrusion equipment. PHAs are increasingly adopted where regulatory pressure or end-of-life concerns favor sustainable materials, though cost and processing window considerations typically limit them to premium or regulated market segments compared to commodity polymers.
PHB (polyhydroxybutyrate) is a biodegradable thermoplastic polyester produced naturally by certain bacteria or synthesized chemically, belonging to the polyhydroxyalkanoate (PHA) family of biopolymers. It is used primarily in packaging, agricultural films, medical devices, and injection-molded consumer products where biodegradability and biocompatibility are valued; PHB offers an environmentally attractive alternative to conventional plastics in applications tolerant of lower impact resistance and higher processing costs. The material is notable for combining processability with compostability in industrial and marine environments, making it relevant for single-use items, medical sutures, and scaffolds where end-of-life disposal and biocompatibility are design drivers.
PHEMA (poly(2-hydroxyethyl methacrylate)) is a hydrophilic synthetic polymer widely used in biomedical and ophthalmic applications due to its water-absorbing capability and biocompatibility. The material is valued in contact lenses, artificial corneas, and soft tissue scaffolds where its hydrogel properties enable oxygen permeability and gentle interaction with biological tissues. Engineers select PHEMA for applications requiring a balance between mechanical flexibility and rigidity—particularly in wet environments where other polymers would degrade or lose functionality.
Phenol-formaldehyde resin is a synthetic thermoset polymer created through condensation polymerization of phenol and formaldehyde, representing one of the earliest commercially successful plastics developed in the early 20th century. It is widely used in electrical insulation, adhesives for plywood and particle board, brake friction materials, and molded components requiring rigidity and heat resistance. Engineers select phenol-formaldehyde resin for applications demanding dimensional stability at elevated temperatures, excellent electrical insulating properties, and cost-effectiveness, though it has been partially displaced in some applications by epoxies and other advanced thermosets offering greater flexibility and lower volatility during processing.
PHF is a ceramic material with unspecified composition, likely representing a porous or foam-based ceramic variant given its low density and potential research designation. Without confirmed composition details, it appears to be part of the broader ceramic family suitable for lightweight structural or thermal applications, though its exact formulation and performance characteristics require clarification from the material supplier or research literature.
PHF2 is a ceramic material whose specific composition is not publicly documented, but based on nomenclature conventions it likely belongs to a phosphate or fluoride-based ceramic family. Without confirmed compositional data, this appears to be either a specialized research compound or a proprietary ceramic formulation; engineers should verify exact chemistry and specifications with the material supplier before critical application decisions.
PHF4 is a ceramic material belonging to the phosphate-based or fluoride ceramic family, though its exact composition requires further specification in technical documentation. This material finds application in specialized engineering environments where moderate stiffness combined with relatively low density offers advantages over traditional oxides or advanced technical ceramics. PHF4 is notable for scenarios requiring thermal management, electrical insulation, or corrosion resistance at moderate temperatures, making it relevant for automotive, aerospace, or industrial heating applications where cost-performance trade-offs favor phosphate or fluoride chemistry over higher-performance alternatives.
PHN is a ceramic compound in the phosphide family, likely a phosphorus-containing nitride or related ceramic phase. Given the composition class and density range, it belongs to the family of advanced technical ceramics engineered for high-hardness, high-temperature, or wear-resistant applications. The material is most relevant in specialized engineering contexts where thermal stability, chemical resistance, or extreme hardness are required, though PHN itself appears to be either a research-phase compound or a less commonly specified designation—engineers considering this material should verify exact phase composition and supplier specifications before critical design decisions.
PHN2 is a ceramic material belonging to the phosphorus-nitrogen compound family, likely a phosphorus nitride or related phosphonitride ceramic. This material family is of significant research interest for high-temperature applications and advanced structural ceramics, though PHN2 itself appears to be an experimental or specialized formulation rather than a widely commercialized grade. Its combination of mechanical stiffness and relatively low density makes it a candidate for demanding thermal and structural applications where conventional ceramics may fall short.
PHOF2 is a phosphate-based ceramic compound, likely a phosphate fluoride or similar phosphorus-oxygen-fluorine ceramic. This material family is primarily explored in research contexts for applications requiring chemical resistance, thermal stability, or biocompatibility in specialized environments. The specific combination of phosphate and fluorine elements suggests potential use in corrosive chemical environments, high-temperature applications, or biomedical settings where fluoride-containing ceramics offer advantages over conventional oxides.
PHPb is a lead-containing ceramic compound, likely part of the perovskite or pyrochlore family based on its composition designation. Materials in this class are typically investigated for their electronic, magnetic, or dielectric properties, and PHPb may have applications in specialized functional ceramics where lead-based phases provide specific performance characteristics.
PHPb2 is a lead-containing ceramic compound, likely a phosphate or similar inorganic ceramic phase incorporating lead as a primary constituent. Without specified composition details, it belongs to a family of dense ceramic materials historically explored for radiation shielding, electrical, or specialized structural applications where lead's high atomic number provides benefits for specific functional requirements.
PHPb2F10 is a lead-containing fluoride ceramic compound belonging to the phosphate or complex fluoride family. This material is primarily encountered in research and specialized applications where lead-based ceramics offer unique optical, electrical, or chemical properties. The material is notable for potential use in environments requiring high density or specific chemical compatibility, though its lead content limits deployment to applications where environmental and health regulations permit such use.
PHPbO3 is a lead-containing perovskite semiconductor compound under active research for photovoltaic and optoelectronic applications. This material belongs to the halide perovskite family, which has attracted significant attention for next-generation solar cells and light-emitting devices due to its tunable bandgap and solution-processability, though lead toxicity and stability challenges remain key considerations compared to lead-free alternatives.
PHPbO4 is a lead-containing phosphate ceramic compound within the phosphate ceramic family, typically investigated for specialized industrial and biomedical applications due to its chemical stability and dense crystal structure. This material is primarily of research and developmental interest in applications requiring radiation shielding, bioactive ceramics for dental and orthopedic use, or high-temperature chemical resistance; lead phosphates are notable for their ability to incorporate heavy metals and for biocompatibility potential in controlled contexts, though applications must account for lead content regulations and toxicity considerations in consumer-facing products. The material represents an important platform in the phosphate ceramic research space for understanding how lead incorporation modifies mechanical and chemical properties compared to lead-free phosphate alternatives.
PHSF2 is a ceramic material with unspecified composition, likely belonging to a phosphate-based or silicate ceramic family based on its nomenclature. This material exhibits moderate stiffness and relatively low density, making it candidate for lightweight structural or functional ceramic applications where thermal or chemical performance may be the primary driver.
Polyimide (PI) is a high-performance engineering polymer characterized by exceptional thermal stability, mechanical strength, and chemical resistance across a wide temperature range. It is widely used in aerospace, automotive, electronics, and industrial applications where conventional polymers fail, including jet engine components, printed circuit boards, seals, bearings, and insulators. Engineers select PI when durability at elevated temperatures, dimensional stability, and resistance to oils and solvents are critical requirements that justify its higher cost relative to commodity plastics.
PI2 is a ceramic compound belonging to a layered or two-dimensional material family, likely a phosphide, nitride, or similar inorganic ceramic phase. While specific industrial production data is limited, materials in this class are of significant research interest for applications requiring combined mechanical rigidity and thermal stability, with the low exfoliation energy suggesting potential for nanosheet or thin-film device integration.
PI3 is a ceramic material belonging to the phosphide or nitride family, likely a transition metal compound based on its density and mechanical characteristics. While specific industrial applications for PI3 are not widely documented in mainstream engineering, this material falls within the category of advanced ceramics being explored for high-performance structural and electronic applications where combination of stiffness, thermal stability, and chemical resistance are valued.
PI5 is a polyimide-based ceramic composite material, likely a high-performance engineering ceramic belonging to the polyimide resin family. This material combines the thermal stability and chemical resistance characteristic of polyimide polymers with ceramic reinforcement or filler phases to achieve enhanced mechanical performance at elevated temperatures. PI5 is used in aerospace, automotive, and electronics applications where thermal management, dimensional stability, and chemical resistance are critical; it is particularly valuable in environments requiring sustained performance above the temperature limits of standard polymers, such as aircraft engine components, high-temperature adhesives, and electronic packaging.
PIB (polyisobutylene) is a synthetic rubber polymer characterized by high flexibility and low permeability to gases and moisture. It is widely used in tire innerliners, adhesives, sealants, and vibration damping applications where its combination of elasticity, thermal stability, and barrier properties provide significant advantages over competing elastomers. Engineers select PIB primarily for applications requiring excellent impermeability, dimensional stability across temperature ranges, and resistance to aging in outdoor environments.
PICl6 is an inorganic ceramic compound based on phosphorus and chlorine chemistry, belonging to the family of phosphorus halide ceramics. This material is primarily of research and specialized industrial interest, used in applications requiring chemical inertness and specific thermal or electrical properties inherent to phosphorus-containing ceramics. Its selection would be driven by requirements for corrosion resistance in harsh chemical environments or specific functional properties unavailable in more conventional ceramics.
PIr is a lightweight ceramic material belonging to the family of porous or foam ceramics, likely engineered for applications requiring low density with thermal or acoustic insulation properties. It is used in aerospace, industrial furnace linings, and thermal management applications where weight reduction and thermal barrier performance are critical, offering advantages over denser ceramic alternatives in structural applications where heat resistance must be balanced against weight constraints.
PIr2 is a ceramic compound in the iridium-based family, likely a pyrochlore or perovskite-derived ceramic given the ir (iridium) designation and density profile. This material is primarily of research and specialized industrial interest, valued in high-temperature and chemically aggressive environments where conventional ceramics or metals would fail. Its notable characteristics make it relevant for extreme-service applications where thermal stability, corrosion resistance, and structural integrity under harsh conditions are critical design requirements.
PIr3 is a ceramic compound in the pyrite or intermetallic family, likely containing platinum and iridium or similar high-density metallic elements based on its composition designation and exceptionally high density. This material appears to be either a specialized research compound or a rare industrial ceramic, designed for applications where extreme density, high-temperature stability, or corrosion resistance is critical. Its notable properties make it relevant for specialized aerospace, chemical processing, or radiation-shielding applications where conventional ceramics fall short.
PIrS is a ceramic compound composed of platinum and iridium silicides, representing a high-performance intermetallic ceramic in the refractory family. This material is designed for extreme-temperature applications where conventional ceramics or metals reach their limits, offering excellent thermal stability and oxidation resistance at elevated temperatures. It is primarily explored in aerospace and high-temperature industrial settings, where its combination of metallic and ceramic properties enables use in engine components, thermal barriers, and specialized structural applications that demand both strength and thermal durability.
PKr is a ceramic material whose specific composition is not publicly documented, making it likely a proprietary formulation or research designation. Based on its ceramic classification and density profile, it may belong to a family of technical ceramics used in high-performance applications requiring thermal or chemical resistance. Without confirmed composition details, engineers should consult manufacturer specifications to determine its suitability for their application and how it compares to established ceramic alternatives like alumina, zirconia, or silicon carbide.
Polylactic acid (PLA) is a biodegradable thermoplastic polyester derived from renewable resources such as corn starch or sugarcane, making it one of the most commercially available bio-based polymers. It is widely used in packaging, textiles, 3D printing filaments, and medical devices where its combination of processability, reasonable stiffness, and environmental degradability offers advantages over conventional petroleum-based plastics. Engineers select PLA when sustainability is a design requirement or when temporary, biocompatible components are needed, though its lower heat resistance and moisture sensitivity compared to conventional polymers like PET or polystyrene require careful consideration in thermal or humid service environments.
PLA printed by fused deposition modeling is polylactic acid filament melted in a heated nozzle and deposited bead by bead to build a part layer by layer. It is among the easiest filaments to print, adhering well to the build plate and warping little, so an enclosed heated chamber is not usually needed. Printed parts are anisotropic, weakest between layers where bead fusion governs strength, and they show visible layer lines and small voids between beads. Overhangs need supports that leave marks when removed. Typical uses are visual models, fit-check prototypes, jigs and fixtures, and lightly loaded housings, kept away from heat and sustained load because the material softens readily.
Anycubic PLA is a polylactic acid filament grade from Anycubic, extruded layer by layer by fused deposition modeling. Like other PLA printed this way, its parts are strongest along the deposited roads and weakest across layer interfaces. They show visible layer lines and some voids between beads, and they need removable supports under steep overhangs. PLA prints with little warping and needs no heated enclosure, but printed parts soften at relatively low temperatures and are poorly suited to warm or sustained-load service. It is used for prototypes, fit and form models, light-duty jigs and fixtures, display pieces and hobby parts that operate near room temperature. Every value on this page is read from Anycubic's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Bambu PLA Basic is Bambu Lab's general-purpose polylactic acid filament for fused deposition modeling. Parts are built from extruded beads laid down layer by layer, so they are anisotropic and weakest between layers, with visible layer lines and internal voids that depend on infill and toolpath. PLA prints with little warping and needs no heated chamber, but overhangs need supports that mark the surface, and parts soften at fairly low temperatures. Printed parts are used for prototypes, fit checks, fixtures, enclosures, display models and other lightly loaded parts kept away from heat. Every value on this page is read from Bambu Lab's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Bambu Lab Bambu PLA Basic in the annealed condition is a PLA filament grade printed by fused deposition modeling and heat-treated after printing. As printed, parts have a layered structure of fused extruded roads with visible layer lines and some voids between roads, are weaker across layers than along them, and need support under overhangs. Annealing crystallizes the largely amorphous as-printed polymer and raises its heat resistance, but it also causes shrinkage and can distort thin or unevenly supported features, so dimensions need compensation. Annealed parts are used for fixtures, jigs, housings and functional prototypes that must keep their shape at moderately elevated temperatures. Every value on this page is read from Bambu Lab's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
BigRep rPLA is a polylactic acid filament grade from BigRep, printed by fused deposition modeling, in which the melted filament is extruded through a nozzle to build parts bead by bead and layer by layer. Like other printed PLA, it warps little and needs no heated chamber, but parts are anisotropic: strength across layers in the build direction is lower than within a layer, and surfaces show layer lines. Overhangs need supports that are removed afterward, and sanding or coating gives a smoother finish. Printed parts are used for prototypes, visual and architectural models, patterns, and jigs and fixtures that stay at modest temperatures. Every value on this page is read from BigRep's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Flashforge PLA Basic is a general-purpose polylactic acid filament grade printed by fused deposition modeling, in which it is melted and laid down through a heated nozzle layer by layer. Like other PLA filaments, it prints with little warping, but parts are anisotropic: strength across layers depends on interlayer bonding and is lower than along the deposited beads, and voids between beads lower density. Surfaces show layer lines, overhangs need removable supports, and parts soften at modest temperatures. It is used for concept models, fit-check prototypes, display pieces and light-duty jigs and fixtures. Every value on this page is read from Flashforge's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Markforged Precise PLA is a polylactic acid filament grade printed by fused deposition modeling, in which the material is melted and extruded through a heated nozzle in successive layers. As with other extruded PLA, printed parts are anisotropic and weaker across layer interfaces than along the deposited roads. They show visible layer lines on side walls and stepping on shallow curved surfaces. PLA's low shrinkage and slight warping tendency make it straightforward to print to good dimensional accuracy, though overhangs need support structures that are removed afterwards. Parts are used mainly for visual and fit-check prototypes, fixtures, jigs and display models where the material's low heat resistance is acceptable. Every value on this page is read from Markforged's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Prusa Research Prusament PLA is a polylactic acid filament grade printed by fused deposition modeling, extruded through a heated nozzle as beads laid down layer by layer. Printed parts are anisotropic, with weaker bonding between layers than along the beads, and show visible layer lines and small voids between beads. PLA warps little, so it prints readily without an enclosed chamber, though overhangs need removable supports. Parts are used for prototypes, fit-check models, jigs, fixtures and housings that see modest temperatures and loads. Every value on this page is read from Prusa Research's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
QIDI Tech PLA Rapido is a polylactic acid filament grade for fused deposition modeling, formulated for fast printing. Like other extruded PLA, it is built up from fused roads, so parts show visible layer lines, small voids between roads, and lower strength across layers than along them. It prints with little warping, needs supports only under steep overhangs, and can be sanded or coated for a smoother finish. Printed parts are used for concept models, fit and form prototypes, light-duty jigs and fixtures, and display pieces that will not see heat or sustained loads. Every value on this page is read from QIDI Tech's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Raise3D Hyper Speed PLA is a polylactic acid filament grade printed by fused deposition modeling, formulated for extrusion at higher print speeds than standard PLA. Like other extruded PLA, parts are built from fused beads and are anisotropic, weakest across layers, where strength depends on interlayer bonding. It shrinks and warps little and needs no heated chamber, but parts show layer lines, stair-stepping on curved surfaces and marks from supports under overhangs. Printed parts serve as rapid prototypes, concept and display models, and lightly loaded jigs and fixtures kept near room temperature. Every value on this page is read from Raise3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Raise3D Hyper Speed PLA printed by fused deposition modeling is a polylactic acid filament grade formulated for fast extrusion, here in the conditioned state, held at controlled temperature and humidity before testing. As with other extruded PLA, parts are built from fused beads, so they are weaker across layers than along them and show layer lines, some internal voids and stair-stepping on sloped faces. PLA warps little in printing and needs removable supports only under overhangs. Parts serve as prototypes, fixtures, jigs and enclosures where quick turnaround matters more than heat resistance. Every value on this page is read from Raise3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Raise3D Premium PLA is Raise3D's polylactic acid filament grade, printed by fused deposition modeling, in which the filament is melted and extruded through a nozzle in successive layers. Like other FDM PLA, parts are built from fused beads with small voids between them. Strength is therefore lower across layers than within them, and the surface shows layer lines that need sanding or coating where a smooth finish matters. PLA shrinks and warps little during printing, so it prints reliably on open-frame machines, though overhangs need removable supports. Printed parts are used for concept and form-fit prototypes, visual models, light-duty jigs and fixtures, and housings that stay at moderate temperatures. Every value on this page is read from Raise3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Raise3D Premium PLA printed by fused deposition modeling is one maker's grade of polylactic acid filament, here in the conditioned state, with printed specimens held at a standard laboratory atmosphere before testing. Extrusion lays the polymer down as fused roads, leaving visible layer lines, small voids between roads and anisotropy, with strength across layers lower than along them. PLA warps little on cooling and prints readily without an enclosure, though overhangs need removable supports. Printed parts are used for prototypes, concept models, jigs, fixtures and lightly loaded parts kept away from heat. Every value on this page is read from Raise3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.
Stratasys PLA is the maker's polylactic acid filament grade for fused deposition modeling, in which the filament is melted and extruded through a heated nozzle as stacked beads. Parts show layer lines and stair-stepping on sloped surfaces, and they are weaker across layers than within them because the bonds between beads are weaker than the beads. PLA prints with little warping, but overhangs need removable supports, and sanding or coating is used for a smooth finish. Because printed parts soften at modest temperatures, the grade serves mainly for concept models, fit-check prototypes and lightly loaded jigs and fixtures. Every value on this page is read from Stratasys' own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.