VGaCo2
metal· VGaCo2
VGaCo2 is an experimental vanadium-gallium-cobalt ternary metal alloy, likely developed for high-strength or high-temperature applications where conventional binary alloys fall short. While not yet established in mainstream industrial production, this material family is of interest in aerospace and materials research communities for potential use in demanding environments requiring enhanced stiffness and thermal stability, though its practical engineering adoption remains limited pending further development and cost optimization.
aerospace research componentshigh-temperature structural applicationsexperimental alloy developmentstiffness-critical designsmaterials science research
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 203.0 | GPa | — | ||
Shear Modulus(G) | 42.22 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 8.336 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 1.943 | µB | — | ||
Seebeck Coefficient(S) | -0.3000 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf)2 entries | -0.2943 | eV/atom | — | ||
| ↳ | -0.2929 | eV/atom | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.