PVA (FDM, UltiMaker PVA) — Properties & Data | MatWorld

PVA (FDM, UltiMaker PVA)

· UltiMaker PVA

UltiMaker PVA is a water-soluble polyvinyl alcohol filament printed by fused deposition modeling as a support material, not as a material for finished parts. It is extruded from a second nozzle alongside a build material such as PLA and removed after printing by soaking the part in water, which leaves cleaner surfaces than breakaway supports. The filament is strongly hygroscopic and must be kept dry, since absorbed moisture causes stringing, bubbling and poor adhesion to the build material. It is used to support complex overhangs, enclosed cavities, internal channels and print-in-place assemblies from which conventional supports could not be removed. Every value on this page is read from UltiMaker's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

supports for complex overhangssupports for enclosed cavitiessupports for internal channelssupports for assemblies

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

PVA (FDM)/PVA (FDM, UltiMaker PVA)

Units:

si imperial

Filter by

Property	Value	Unit	Conditions	Source
Glass Transition Temperature(Tg)	331.6	K	ISO 11357
Melting Point / Solidus(Tm)	448.6	K	ISO 11357

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	1.230	kg/m³	ASTM D1505

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.