PdBr2 — Properties & Data | MatWorld

PdBr2

ceramic

· JVASP-4204· PdBr2

PdBr2 is a palladium bromide ceramic compound that exists primarily in research and experimental contexts rather than established industrial production. This material belongs to the halide ceramic family and is of interest in materials science for studies of layered crystal structures and two-dimensional material exfoliation, particularly given its relatively low exfoliation energy that makes mechanical layer separation feasible. While not yet a mainstream engineering material, PdBr2 and related palladium halides are being investigated for potential applications in catalysis, electronic devices, and as precursor materials for advanced functional ceramics.

research and development2D materials studiescatalyst researchelectronic device prototypinghalide ceramic experimentation

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65

Units:

si imperial

Property	Value	Unit	Conditions
Bulk Modulus(K)	15.78	GPa	DFT · OptB88vdW
Exfoliation Energy(Eexf)	84.40	meV/atom	DFT · OptB88vdW
Poisson's Ratio(ν)	0.3200	-	DFT · OptB88vdW
Shear Modulus(G)	7.270	GPa	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	5.357	kg/m³	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Filter by

Method

Carrier

Property	Value	Unit	Conditions
Band Gap(Eg)2 entries	0.5900	eV	DFT · OptB88vdW
↳	0.6210	eV	DFT · TBmBJ
Dielectric Constant (Relative Permittivity)(εr)	9.852	-	DFT · OptB88vdW
High-Frequency Dielectric Constant (ε∞)(ε∞)2 entries	7.959	-	DFT · OptB88vdW
↳	6.831	-	DFT · TBmBJ
Magnetic Moment(μB)	0.000	µB	DFT · OptB88vdW
Piezoelectric Modulus(eij)	0.000	C/m²	DFT · OptB88vdW
Thermoelectric Power Factor(PF)2 entries	0.00114	W/(m·K²)	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	0.000761	W/(m·K²)	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Seebeck Coefficient(S)2 entries	-212.2	μV/K	DFT · OptB88vdW · n-type · 1e20 cm⁻³ · 327°C
↳	291.4	μV/K	DFT · OptB88vdW · p-type · 1e20 cm⁻³ · 327°C
Spectroscopic Limited Maximum Efficiency (SLME)(SLME)	20.23	%	DFT · TBmBJ

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Energy Above Hull(ΔEhull)	0.000	eV/atom	DFT · OptB88vdW
Formation Energy(ΔHf)	-0.2973	eV/atom	DFT · OptB88vdW

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

PdBr2

Mechanical Properties

Physical Properties

Electrical Properties

Other Properties

Regulatory Screening

Environmental