PA11 (SLS, EOS PA 1102 Black, dry as moulded) — Properties & Data | MatWorld

PA11 (SLS, EOS PA 1102 Black, dry as moulded)

· PA 1102 Black

EOS PA 1102 Black is a black-pigmented PA11 powder grade for selective laser sintering, described here in the dry state. Parts build in a heated powder bed that supports them, so no support structures are needed. They come out slightly porous with a matte, grainy surface, usually cleaned by blasting. As with other laser-sintered polyamides, strength and elongation are lower in the build direction than in the build plane. Compared with laser-sintered PA12, the PA11 base gives more ductile, impact-resistant parts, suited to snap fits, living hinges, clips, ducts and housings, where the through colour avoids dyeing. Every value on this page is read from EOS's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

snap fitsliving hingesclipsductshousings

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

PA11 (SLS)/PA11 (SLS, EOS PA 1102 Black, dry as moulded)

Units:

si imperial

Filter by

Orientation

Specification

Property	Value	Unit	Conditions
Notched Charpy Impact Strength(acN)3 entries	7.800	kJ/m²	23°C · dry as moulded · ISO 179/1eA · X
↳	7.800	kJ/m²	23°C · dry as moulded · ISO 179/1eA · Y
↳	6.500	kJ/m²	23°C · dry as moulded · ISO 179/1eA · Z
Ultimate Tensile Strength(σUTS)3 entries	48.00	MPa	dry as moulded · ISO 527-1/-2 · X
↳	48.00	MPa	dry as moulded · ISO 527-1/-2 · Y
↳	48.00	MPa	dry as moulded · ISO 527-1/-2 · Z
Young's Modulus(E)3 entries	1.560	GPa	dry as moulded · ISO 527-1/-2 · X
↳	1.560	GPa	dry as moulded · ISO 527-1/-2 · Y
↳	1.610	GPa	dry as moulded · ISO 527-1/-2 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Glass Transition Temperature(Tg)	319.5	K	—
Melting Point / Solidus(Tm)	457.8	K	—

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.