NdInCu2
metal· JVASP-18055· NdInCu2
NdInCu2 is an intermetallic compound combining neodymium, indium, and copper, belonging to the rare-earth transition metal alloy family. This material is primarily of research and development interest rather than established commercial production, with potential applications in magnetic devices and specialized electronic components where rare-earth intermetallics offer enhanced functional properties. Engineers would consider this compound when conventional alloys cannot meet requirements for magnetic performance, thermal management in constrained geometries, or when the specific atomic-scale ordering of rare-earth systems provides advantages over single-phase alternatives.
rare-earth intermetallic researchmagnetic materials developmentelectronic device componentshigh-performance niche alloysmaterials characterization studies
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | Pa | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.