Nb3TeCl7
metal· JVASP-5602· Nb3TeCl7
Nb3TeCl7 is a layered niobium tellurium chloride compound representing an emerging class of transition metal halides with van der Waals bonding between layers. This is primarily a research material under investigation for two-dimensional (2D) device applications, as its layered structure enables mechanical exfoliation to produce ultrathin sheets—a key advantage for next-generation electronics and optoelectronics where reduced material dimensionality creates novel properties unavailable in bulk form.
2D materials researchexfoliable layered compoundsnanoelectronics prototypingvan der Waals heterostructuresmaterials science experimentationtransition metal halide studies
Compliance & Regulations
?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 35.12 | GPa | — | ||
Exfoliation Energy(Eexf) | 72.98 | meV/atom | — | ||
Poisson's Ratio(ν) | 0.2700 | - | — | ||
Shear Modulus(G) | 20.93 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 4.114 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.6980 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 9.858 | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Piezoelectric Modulus(eij) | 0.000 | C/m² | — | ||
Seebeck Coefficient(S) | -381.7 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -1.260 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Export Control
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.