KYS2
ceramic· JVASP-36115· KYS2
KYS2 is a ceramic material of unspecified composition, likely belonging to an oxide, carbide, or advanced ceramic family based on its density and elastic properties. It is used in applications requiring high stiffness, thermal stability, and wear resistance where traditional metals or polymers are unsuitable due to temperature or chemical constraints. The material's selection typically depends on its thermal conductivity, fracture toughness, and machinability relative to competing ceramics—engineers would choose KYS2 when these secondary properties align with their thermal management, structural, or corrosion-resistance requirements.
high-temperature structural componentswear and abrasion resistant coatingsthermal insulation applicationsprecision engineering componentschemical corrosion environmentsadvanced ceramic systems
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 47.97 | GPa | — | ||
Poisson's Ratio(ν) | 0.2300 | - | — | ||
Shear Modulus(G) | 32.42 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 3.109 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 2.405 | eV | — | ||
Dielectric Constant (Relative Permittivity)(εr) | 13.82 | - | — | ||
Magnetic Moment(μB) | 0.000 | µB | — | ||
Piezoelectric Modulus(eij) | 0.000 | C/m² | — | ||
Seebeck Coefficient(S) | -275.8 | µV/K | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.000 | eV/atom | — | ||
Formation Energy(ΔHf) | -2.092 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.