Inconel X-750 is a precipitation-hardenable nickel-chromium superalloy with aluminum and titanium additions, used primarily in aerospace gas turbine engines, fasteners, and high-temperature structural applications requiring strength retention to approximately 1300°F (700°C). The annealed condition provides a softened baseline microstructure suitable for machining and forming prior to age hardening, with moderate strength and good ductility as supplied per AMS 5542.
Compliance & Regulations
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)4 entries | 1.703 | GPa | 22°C · Sheet · Annealed and aged · AMS 5542 · t=0.010-0.187 in · e/D=1.5 | ||
| ↳ | 1.600 | GPa | 22°C · Plate · Annealed and aged · AMS 5542 · t=0.188-4.000 in · e/D=1.5 | ||
| ↳ | 2.158 | GPa | 22°C · Sheet · Annealed and aged · AMS 5542 · t=0.010-0.187 in · e/D=2 | ||
| ↳ | 2.027 | GPa | 22°C · Plate · Annealed and aged · AMS 5542 · t=0.188-4.000 in · e/D=2 | ||
Bearing Yield Strength(Fbry)4 entries | 1.082 | GPa | 22°C · Sheet · Annealed and aged · AMS 5542 · t=0.010-0.187 in · e/D=1.5 | ||
| ↳ | 1.034 | GPa | 22°C · Plate · Annealed and aged · AMS 5542 · t=0.188-4.000 in · e/D=1.5 | ||
| ↳ | 1.303 | GPa | 22°C · Sheet · Annealed and aged · AMS 5542 · t=0.010-0.187 in · e/D=2 | ||
| ↳ | 1.241 | GPa | 22°C · Plate · Annealed and aged · AMS 5542 · t=0.188-4.000 in · e/D=2 | ||
Compressive Modulus(Ec) | 211.0 | GPa | 22°C · Strip | ||
Compressive Yield Strength(Fcy)2 entries | 723.9 | MPa | 22°C · Sheet · Annealed and aged · AMS 5542 · LT · t=0.010-0.187 in | ||
| ↳ | 689.5 | MPa | 22°C · Plate · Annealed and aged · AMS 5542 · LT · t=0.188-4.000 in | ||
Elongation at Break(εf)3 entries | 15.00 | - | 22°C · Strip · Annealed and aged · AMS 5542 · LT · t=≥0.010 in | ||
| ↳ | 20.00 | - | 22°C · Sheet · Annealed and aged · AMS 5542 · LT · t=0.010-0.187 in | ||
| ↳ | 20.00 | - | 22°C · Plate · Annealed and aged · AMS 5542 · LT · t=0.188-4.000 in | ||
Poisson's Ratio(ν) | 0.3000 | - | 22°C | ||
Shear Modulus(G) | 81.36 | GPa | 22°C · Strip | ||
Ultimate Shear Strength(Fsu)2 entries | 737.7 | MPa | 22°C · Sheet · Annealed and aged · AMS 5542 · t=0.010-0.187 in | ||
| ↳ | 689.5 | MPa | 22°C · Plate · Annealed and aged · AMS 5542 · t=0.188-4.000 in | ||
Ultimate Tensile Strength(σUTS)4 entries | 1.069 | GPa | 22°C · Plate · Annealed and aged · AMS 5542 · LT · t=0.188-4.000 in | ||
| ↳ | 1.034 | GPa | 22°C · Strip · Annealed and aged · AMS 5542 · LT · t=≤0.009 in | ||
| ↳ | 1.069 | GPa | 22°C · Strip · Annealed and aged · AMS 5542 · LT · t=≥0.010 in | ||
| ↳ | 1.138 | GPa | 22°C · Sheet · Annealed and aged · AMS 5542 · LT · t=0.010-0.187 in | ||
Yield Strength (0.2% offset)(σy)2 entries | 723.9 | MPa | 22°C · Sheet · Annealed and aged · AMS 5542 · LT · t=0.010-0.187 in | ||
| ↳ | 689.5 | MPa | 22°C · Plate · Annealed and aged · AMS 5542 · LT · t=0.188-4.000 in | ||
Young's Modulus(E) | 211.0 | GPa | 22°C · Strip |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (14 pts) | 1/K | — | ||
Specific Heat vs Temperature(Cp(T)) | Curve (11 pts) | J/(kg·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 8.249 | kg/m³ | 22°C |