high-density polyethylene
polymerHigh-density polyethylene (HDPE) is a semi-crystalline thermoplastic polymer characterized by a linear molecular structure with minimal branching, resulting in high stiffness and strength relative to other polyethylenes. It is widely used across packaging, automotive, and infrastructure sectors where a balance of rigidity, impact resistance, and chemical durability is needed at moderate temperatures. Engineers select HDPE over lower-density polyethylenes when higher modulus and creep resistance are required, and over rigid plastics like polycarbonate when cost and processability are priorities.
rigid plastic containers and bottlespiping and fluid transportautomotive fuel tanksgeomembranes and linersplastic lumber and outdoor structuresfood and chemical packaging
Compliance & Regulations
?UL 94?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Strength(σc) | — | Pa | — | — | |
Elongation at Break(εf) | — | - | — | — | |
Flexural Strength (MOR)(σf) | — | Pa | — | — | |
Hardness (Vickers)(HV) | — | HV | — | — | |
Ultimate Tensile Strength(σUTS) | — | Pa | — | — | |
Young's Modulus(E) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Glass Transition Temperature(Tg) | — | K | — | — | |
Melting Point / Solidus(Tm) | — | K | — | — | |
Maximum Service Temperature(Tmax) | — | K | — | — | |
Thermal Conductivity(k) | — | W/(m·K) | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Refractive Index(n) | — | - | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.