Hastelloy X (L-PBF, Velo3D Hastelloy X, annealed) — Properties & Data | MatWorld

Hastelloy X (L-PBF, Velo3D Hastelloy X, annealed)

UNS N06002· Hastelloy X

Velo3D Hastelloy X is the maker's grade of the nickel-chromium-iron-molybdenum alloy Hastelloy X made by laser powder bed fusion, here in the annealed condition. As built, it has a fine cellular structure with columnar grains along the build direction and high residual stress. It is also prone to solidification cracking, which the powder chemistry and process parameters are chosen to limit. Annealing relieves residual stress and partly recrystallizes the as-built structure, trading some strength for ductility and reducing anisotropy between build directions. Parts include gas turbine combustor hardware, fuel nozzles and heat exchangers with internal passages. Every value on this page is read from Velo3D's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

gas turbine combustor hardwarefuel nozzlesheat exchangers

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

Hastelloy X (L-PBF)/Hastelloy X (L-PBF, Velo3D Hastelloy X, annealed)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Statistic

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	52.60	%	mean −3σ · annealed · ASTM E8 · Z
↳	57.80	%	annealed · ASTM E8 · Z
Ultimate Tensile Strength(σUTS)2 entries	625.0	MPa	mean −3σ · annealed · ASTM E8 · Z
↳	644.0	MPa	annealed · ASTM E8 · Z
Yield Strength (0.2% offset)(σy)2 entries	320.0	MPa	mean −3σ · annealed · ASTM E8 · Z
↳	336.0	MPa	annealed · ASTM E8 · Z
Young's Modulus(E)2 entries	132.0	GPa	mean −3σ · annealed · ASTM E8 · Z
↳	227.0	GPa	annealed · ASTM E8 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	8.221	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.