Clad 7475 Aluminum T7451
metalClad 7475 Aluminum T7451 is a high-strength aluminum-zinc-magnesium-copper alloy with a thin corrosion-resistant aluminum or aluminum-magnesium clad layer, used primarily in aircraft structural applications where elevated fatigue performance and stress-corrosion cracking (SCC) resistance are critical. The T7451 temper (overaged condition following solution heat treatment and controlled stretching) provides yield strengths around 435 MPa with improved SCC resistance compared to T7351, at the expense of slightly lower tensile strength.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Sheet | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Sheet | — | |
Young's Modulus(E) | — | Pa | 22°C · Sheet | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.