BeSnBi
ceramic· JVASP-67052· BeSnBi
BeSnBi is an intermetallic ceramic compound composed of beryllium, tin, and bismuth. This is an experimental material primarily of research interest for investigating phase stability and mechanical properties in the Be-Sn-Bi ternary system, with potential applications in specialized high-temperature or radiation-resistant applications where beryllium compounds are leveraged. Its adoption in engineering remains limited compared to established ceramics; primary interest lies in materials science research exploring new intermetallic phases for advanced aerospace, nuclear, or thermal management contexts.
research and developmentintermetallic compound studieshigh-temperature ceramicsnuclear materials researchphase diagram explorationspecialized aerospace materials
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 40.97 | GPa | — | ||
Poisson's Ratio(ν) | 0.3400 | - | — | ||
Shear Modulus(G) | 11.84 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 7.769 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.4380 | eV/atom | — | ||
Formation Energy(ΔHf) | 0.4380 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.