BeIn4Ir
ceramic· JVASP-65216· BeIn4Ir
BeIn₄Ir is an experimental intermetallic ceramic compound combining beryllium, indium, and iridium. This material belongs to the family of high-performance intermetallics being investigated for extreme-environment applications where conventional ceramics or superalloys reach their limits. While not yet in widespread commercial production, compounds in this material class are of research interest for their potential combination of thermal stability, hardness, and chemical resistance, particularly in aerospace and high-temperature structural applications where cost and density trade-offs against performance are carefully evaluated.
high-temperature aerospace componentsexperimental refractory materialsnuclear reactor internalswear-resistant coatingsresearch phase development
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | Pa | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Magnetic Moment(μB) | — | µB | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.