Ba2ClF3
ceramic· JVASP-35827· Ba2ClF3
Ba2ClF3 is a halide ceramic compound combining barium with chloride and fluoride anions, representing a mixed-halide ceramic system. This material belongs to the family of fluoride and chloride ceramics, which are typically studied for specialized optical, thermal, or electrochemical applications where conventional oxides are unsuitable. Ba2ClF3 remains primarily a research-phase compound; its potential lies in ionic conductivity, luminescence, or chemical stability in corrosive environments where engineer-designers need alternatives to standard oxide ceramics.
Optical windows and radiation-resistant coatingsSolid-state ionic conductorsChemical-resistant coatingsExperimental ceramics researchHigh-temperature thermal barriers
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | — | Pa | — | — | |
Poisson's Ratio(ν) | — | - | — | — | |
Shear Modulus(G) | — | Pa | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | — | eV | — | — | |
Dielectric Constant (Relative Permittivity)(εr) | — | - | — | — | |
Magnetic Moment(μB) | — | µB | — | — | |
Piezoelectric Modulus(eij) | — | C/m² | — | — | |
Seebeck Coefficient(S) | — | µV/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | — | eV/atom | — | — | |
Formation Energy(ΔHf) | — | eV/atom | — | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.